[1] D. Reay, R. McGlen, and P. Kew, Heat pipes: theory, design and applications. Butterworth-Heinemann, 2013.
[2] A. Faghri, Heat pipe science and technology. Global Digital Press, 1995.
[3] M. Arab, M. Soltanieh, and M. B. Shafii, "Experimental investigation of extra-long pulsating heat pipe application in solar water heaters," Experimental Thermal and Fluid Science, vol. 42, pp. 6-15, 2012, doi: 10.1016/j.expthermflusci.2012.03.006.
[4] A. Ozsoy and V. Corumlu, "Thermal performance of a thermosyphon heat pipe evacuated tube solar collector using silver-water nanofluid for commercial applications," Renewable Energy, vol. 122, pp. 26-34, 2018, doi: 10.1016/j.renene.2018.01.031.
[5] Y.-C. Weng, H.-P. Cho, C.-C. Chang, and S.-L. Chen, "Heat pipe with PCM for electronic cooling," Applied Energy, vol. 88, no. 5, pp. 1825-1833, 2011, doi: 10.1016/j.apenergy.2010.12.004.
[6] W. Huang, W. Cao, and F. Jiang, "A novel single-well geothermal system for hot dry rock geothermal energy exploitation," Energy, vol. 162, pp. 630-644, 2018, doi: 10.1016/j.energy.2018.08.055.
[7] X. P. Wu, P. Johnson, and A. Akbarzadeh, "Application of heat pipe heat exchangers to humidity control in air-conditioning systems," Applied thermal engineering, vol. 17, no. 6, pp. 561-568, 1997.
[8] G. P. Peterson, "An introduction to heat pipes. Modeling, testing, and applications," Wiley Series in Thermal Management of Microelectronic and Electronic Systems, 1994.
[9] S. H. Noie, "Heat transfer characteristics of a two-phase closed thermosyphon," Applied Thermal Engineering, vol. 25, no. 4, pp. 495-506, 2005, doi: 10.1016/j.applthermaleng.2004.06.019.
[10] J. Raghuram, K. P. Kumar, G. Khiran, K. Snehith, and S. B. Prakash, "Thermal performance of a selected heat pipe at different tilt angles," in IOP Conference Series: Materials Science and Engineering, 2017, vol. 225, no. 1: IOP Publishing, p. 012043.
[11] B. Jiao, L. M. Qiu, X. B. Zhang, and Y. Zhang, "Investigation on the effect of fillinging ratio on the steady-state heat transfer performance of a vertical two-phase closed thermosyphon," Applied Thermal Engineering, vol. 28, no. 11-12, pp. 1417-1426, 2008, doi: 10.1016/j.applthermaleng.2007.09.009.
[12] A. A. Chehade, H. Louahlia-Gualous, S. Le Masson, I. Victor, and N. Abouzahab-Damaj, "Experimental investigation of thermosyphon loop thermal performance," Energy Conversion and Management, vol. 84, pp. 671-680, 2014, doi: 10.1016/j.enconman.2014.04.092.
[13] R. Manimaran, K. Palaniradja, N. Alagumurthi, and K. Velmurugan, "An Investigation of Thermal Performance of Heat Pipe Using Di-water," Science and Technology, vol. 2, no. 4, pp. 77-80, 2012, doi: 10.5923/j.scit.20120204.04.
[14] A. Alizadehdakhel, M. Rahimi, and A. A. Alsairafi, "CFD modeling of flow and heat transfer in a thermosyphon," International Communications in Heat and Mass Transfer, vol. 37, no. 3, pp. 312-318, 2010, doi: 10.1016/j.icheatmasstransfer.2009.09.002.
[15] L. Lu, Z.-H. Liu, and H.-S. Xiao, "Thermal performance of an open thermosyphon using nanofluids for high-temperature evacuated tubular solar collectors," Solar Energy, vol. 85, no. 2, pp. 379-387, 2011, doi: 10.1016/j.solener.2010.11.008.
[16] H. Arat, O. Arslan, U. Ercetin, and A. Akbulut, "Experimental study on heat transfer characteristics of closed thermosyphon at different volumes and inclination angles for variable vacuum pressures," Case Studies in Thermal Engineering, vol. 26, 2021, doi: 10.1016/j.csite.2021.101117.
[17] N. Ashgriz and J. Mostaghimi, "An introduction to computational fluid dynamics," Fluid flow handbook, vol. 1, pp. 1-49, 2002.
[18] A. Kumar, "Analysis of Heat Transfer and Fluid Flow in Different Shaped Roughness Elements on the Absorber Plate Solar Air Heater Duct," Energy Procedia, vol. 57, pp. 2102-2111, 2014, doi: 10.1016/j.egypro.2014.10.176.
[19] A. A. Alammar, R. K. Al-Dadah, and S. M. Mahmoud, "Numerical investigation of effect of fill ratio and inclination angle on a thermosiphon heat pipe thermal performance," Applied Thermal Engineering, vol. 108, pp. 1055-1065, 2016, doi: 10.1016/j.applthermaleng.2016.07.163.
[20] F. P. Incropera, D. P. DeWitt, T. L. Bergman, and A. S. Lavine, Fundamentals of heat and mass transfer. Wiley New York, 1996.
[21] A. A. G. Alammar, "Enhancing thermal performance of heat pipe based solar thermal collector," University of Birmingham, 2018.
[22] S. C. K. De Schepper, G. J. Heynderickx, and G. B. Marin, "Modeling the evaporation of a hydrocarbon feedstock in the convection section of a steam cracker," Computers & Chemical Engineering, vol. 33, no. 1, pp. 122-132, 2009, doi: 10.1016/j.compchemeng.2008.07.013.
[23] B. Fadhl, L. C. Wrobel, and H. Jouhara, "Numerical modelling of the temperature distribution in a two-phase closed thermosyphon," Applied Thermal Engineering, vol. 60, no. 1-2, pp. 122-131, 2013.
[24] M. Nazarimanesh, T. Yousefi, and M. Ashjaee, "Experimental study on the effects of inclination situation of the sintered heat pipe on its thermal performance," Experimental Thermal and Fluid Science, vol. 68, pp. 625-633, 2015.
[25] H. Jouhara and A. J. Robinson, "Experimental investigation of small diameter two-phase closed thermosyphons charged with water, FC-84, FC-77 and FC-3283," Applied thermal engineering, vol. 30, no. 2-3, pp. 201-211, 2010.